Defender Security 812BF Especificaciones descargar pdf (Pagina 22)

SERVICE INSTRUCTIONS

HANDLE blades with extreme caution to

avoid injury. Gloves should always be

worn when handling the cutter blades.

THE drive belts should be connected

while changing blades, as this will restrict

sudden movement of the rotor.

THE major components of this machine

are heavy. Lifting equipment must be

used for disassembly.

CLEAN machines are safer and easier to

service.

AVOID contact with hydraulic oil and fuel.

SAFE MAINTENANCE (ALL MODELS)

Only fit genuine Timberwolf replacement blades, screws and chipper spares. Failure to do so

will result in the invalidation of the warranty and may result in damage to the chipper, personal

injury or even loss of life.

SPARES (ALL MODELS)

ALWAYS IMMOBILISE THE ENGINE BEFORE UNDERTAKING ANY MAINTENANCE WORK ON

THE CHIPPER BY REMOVING THE KEY AND DISCONNECTING THE NEGATIVE LEAD AT THE

BATTERY.

SAFE LIFTING OF THE CHIPPER (ALL MODELS)

The lifting eye is designed to lift the machine’s

weight only. Do not use hoist hook directly on

the lifting eye, use a correctly rated safety

shackle. Inspect the lifting eye prior to each

use - DO NOT USE LIFTING EYE IF

DAMAGED.

Model shown 190TDHB

ENGINE MANUFACTURER’S HANDBOOK

GREASING ROTOR BEARINGS (ALL MODELS)

Both front and rear bearings are sealed and do not need greasing.

Refer to your Engine Manufacturer’s Handbook for detailed instructions on the following:

Checking the engine oil.

Changing the engine oil.

Changing the engine oil filter.

Changing the fuel filter.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 77 78

Sin comentarios

Defender Security 812BF Especificaciones Pagina 22