Defender Security 812BF Manual de usuario

2.4GHz Wireless Camerawith Detecting RecorderModel No.: 812BF Operation GuideVersion No.: 1.0Please read this user Manual carefully bef

-8-Press Channel Button continuously, the Channel Indicator lights up.If the Channel Indicator flashes once, the channel is channel 1. If the Channel

Receiver Operation1. Menu Key Operation You are recommended to press menu key to set before its first use. Monitor/AV displays picture as foll

Advanced setup: Picture displays as follows, Press <Left/Right> key to select and press OK key to enter setting. A. TV setup: Press OK

3. Play mode Press Play key to replay saved videos or pictures. Press play key again to enter the monitoring mode. After entering replay mo

-13-Consumption Current(Max.)160mA&250mAIntermediate FrequencyAntenna50 ohm SMAVideo Output Signal LevelStorage MediaSD Card memory(max.)Power Sup

FCC INFORMATIONThis device complies with part15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause h

CONTENTS1. Overview2. Features4. Connection Diagram3. Packing List5. Structure6. Installation7. Receiver Operation8. Specifications9. FCC & EU112

OverviewFeatures-1-The wireless SDR harddisk recorder is a general harddisk recorder launched for civil security market. Designed with such new techno

-2-Packing ListConnection Diagram2.4GHz Wireless Camera x 12.4GHz Wireless Receiver x 1Antenna for Receiver x 1Adapter for Receiver x 1Ada

-3-StructureCameraGP-812TPower JackAntennaInfrared LightsLensUniversal Bracket

AntennaLeft ButtonUp ButtonOK ButtonDown ButtonRight ButtonChannel SwitchRecord ButtonChannel IndicatorPower IndicatorAutomatic Detection/Recording In

-5-Installation1. Locate the camera to a specific position and then adjust it to a suitable angle.2. Connect the adapter to the camera.3. Connect

-6-AV Cable5. Connect the adapter for receiver to the receiver. 4. Connect the receiver to a monitor/TV with AV cable.6. Please insert SD Card to SD C

-7-7. Push the power switch to ON position and the power indicator lights up.If the SD Card is inserted incorrectly or is not inserted, the monit